Right Coolant Pipes On Longitudinal Member, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi SQ5, 2021 Audi SQ5, 2020 Audi SQ5, 2019 Audi SQ5, and 2018 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Loosen the hose clamps -1- and remove the coolant hoses.

Fig 1: Coolant Pipes on Longitudinal Member - Tightening Specifications:

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -arrows-.

-- Remove the bolts -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the hose clamps -arrows-, remove the coolant hoses and remove the coolant pipes.