Large Right Rear Coolant Pipe, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Audi SQ5, 2021 Audi SQ5, 2020 Audi SQ5, 2019 Audi SQ5, and 2018 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
- Secure all hose connections with hose clamps that match the ones used in series production.
- Used coolant cannot be used again.
-- Coat the new O-ring with coolant.
-- Install the heat shield and engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Connect the coolant hose to the connector coupling. Refer to Figure.
-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .