Overview - Coolant Pipes on Engine
WARNING: This page is about a different car, the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, and 2021 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 9 Nm
- Coolant Hose
- Bolt
- 6 Nm
- Thread cutting
- Position the bolt by hand and tighten it until it finds the old threads. Then tighten the bolt to the specification.
- Coolant Hose
- Bolt
- 20 Nm
- Coolant Hose
- Bolt
- 20 Nm
- Right Coolant Pipe
- Removing and Installing. Refer to RIGHT COOLANT PIPE, REMOVING AND INSTALLING .
- O-Ring
- Replace after removing
- Left Coolant Pipe
- There are different versions. Refer to the Parts Information for the allocation.
- Removing and Installing. Refer to LEFT COOLANT PIPE, REMOVING AND INSTALLING .
- Bolt
- 9 Nm
- Coolant Hose
- Fold back and pry up the clip to remove the heat shield boot
- Connecting. Refer to Figure.
- Bolt
- 6 Nm
- Thread cutting
- Position the bolt by hand and tighten it until it finds the old threads. Then tighten the bolt to the specification.