Lane Change Assistance Control Module -J769- / -J770-, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Vehicles with TDI engine - engine, right side of vehicle: remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Release the retainer -2- and tilt the control module -3- out in direction of -arrow-.
-- Disengage and remove the control module from the lower mount -4-.
-- Disconnect the connector -1-.