Driver Assistance Systems Front Camera, Replacing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the interior rearview mirror. Refer to INTERIOR REARVIEW MIRROR, REMOVING AND INSTALLING .
-- Remove the front interior lamp/reading lamp. Refer to FRONT INTERIOR LAMP/READING LAMP, REMOVING AND INSTALLING .
-- Remove the center support for the sun visor. Refer to SUN VISOR CENTER SUPPORT, REMOVING AND INSTALLING .
-- Disconnect the connector.
-- Release the securing clip -3- and pivot it downward in direction of -arrow A-. Release the catches in direction of -B arrows-.
-- Wait one minute so that the silicone pad can be removed without leaving any residue.
-- Remove the driver assistance systems front camera -2- from the mount -1-.
-- Clean the adhesive surface on the windshield with Cleaning Solution:D 009 401 04 .
- Any silicone residue must be completely removed.