12 V Socket 4 -U20-, REPLACING: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: 12 V Socket 5 -U26-

Courtesy of AUDI OF AMERICA, LLC

-- The release tabs -2- of the :T40148 must engage in the recesses of the 12 V Socket -3- in direction of -arrow-, for this the threaded rod -1- must be pushed down all the way.

-- Open the mount cover -2- and hold it in that position.

Fig 2: Identifying Piston -2- And Release Tabs -1

Courtesy of AUDI OF AMERICA, LLC

-- Slide the :T40148 all the way into the 12 V socket -3-.

-- Turn the thumbwheel -1- at the :T40148 clockwise all the way to the end stop.

The plunger -2- is pulled up and the release tabs -1- are spreading in the :T40148 in direction of -arrows-.

Fig 3: Identifying Release Tool T40148 In Use
Courtesy of AUDI OF AMERICA, LLC

-- Remove the 12 V socket from the luggage compartment side trim panel cover.

-- Disconnect the connector.