Measurement Preparations For Calibrating/Aligning The Driver Assistance Systems, Quick Access Mode
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Perform the following steps using "quick access" if one or more systems on the vehicle will be calibrated/adjusted (without a previous axle alignment):
Select the "quick access" mode on the wheel alignment computer when the driver assistance systems need to be calibrated/aligned or the dynamic steering needs the basic setting.
- Connect the battery charger for the battery support mode. Refer to BATTERY, CHARGING .
- Position the front wheels so they are straight.
- Check the DTC memory before starting a calibration/alignment. Fix all displayed entries.
- Vehicle accurately aligned, suspension bounced and rocked several times
- The vehicle exterior lamps are off.
- All the vehicle doors are closed.