Overview - Luggage Compartment Side Trim Panel
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
- Lock Carrier Trim Panel
- Removing and installing. Refer to LOCK CARRIER TRIM PANEL, REMOVING AND INSTALLING .
- Must engage in the pins
- Press on until it engages audibly
- Stretch the lip of the rear lid seal over
- Clip
- Replace damaged or deformed clips
- Insert in the trim panel
- Remove any clips remaining in the mounting points using the Omega Clip Tool:T40280 and insert them into the trim panel for installation.
- Quantity: 4
- Clip
- Replace damaged or deformed clips
- Insert in the trim panel
- Remove any clips remaining in the mounting points using the Omega Clip Tool:T40280 and insert them into the trim panel for installation.
- Quantity: 2
- Spring Nut
- Insert in the bracket
- Bolt
- 2 Nm
- Luggage Compartment Side Trim Panel Bracket
- Removing and installing. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING .
- Clip
- Replace damaged or deformed clips
- Insert in the trim panel
- Quantity: 3
- Button Trim
- Driver side only
- Removing and installing. Refer to BUTTON TRIM, REMOVING AND INSTALLING .
- Press on until it engages audibly
- Bolt
- 3 Nm
- Cap
- Press on until it engages audibly
- Clip
- Replace damaged or deformed clips
- Insert in the cover
- Quantity: 2
- Cover
- Unclip using the Trim Removal Wedge:3409
- Press on until it engages audibly
- Luggage Compartment Side Trim Panel
- Removing and installing. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING .
- Press on until it engages audibly
- Stretch the lip of the rear lid seal over
- Service Cover