Center Speaker Trim, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
There is a risk of damaging the speaker trim.
- Proceed very carefully when removing and installing.
-- Detach the speaker trim -1- using the :T10383/1 -arrow- by only sliding the wedge approximately 2 mm into the seam under the speaker trim.
-- Disengage the remaining tabs for the speaker trim along the seam.
-- If necessary, insert a scraper from the :VAS6845 forward under the speaker trim and disengage the front retaining pins.
Speaker Trim Mount, Removing
-- Carefully pry out the speaker trim mount -2- at the retainers -1- using the :T10383/1 -arrow-.
-- If necessary, carefully release the remaining retainers using the :3409 and remove the mount upward.