Rear A/C Display Control Head -E265-, REMOVING AND INSTALLING, "High" A/C SYSTEM, Q5: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Switch off the ignition.
-- Remove the rear center console vent -A-. Refer to OVERVIEW - CENTER CONSOLE .
-- Loosen the clamp -E- from the Rear A/C Display Control Head -E265-.
-- Pry out the Rear A/C Display Control Head -E265- from the rear center console -A- -arrow-.
-- Disconnect the connectors -C- and if equipped connector -D- from the Rear A/C Display Control Head -E265- -B-.