Humidity Sensor -G355-, Rain/Light Recognition Sensor -G397-, AND Sunlight Photo Sensor -G107-, REMOVING AND INSTALLING
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
- Depending on the vehicle model, the Sunlight Photo Sensor -G107- may not be in the defroster vent in 2016 or 2017 and was then installed in the mirror base. For vehicles which were produced in the transition period, a Sunlight Photo Sensor -G107- (no function) is installed instead in the defroster vent; it is however not wired. Refer to Sunlight Photo Sensor -G107-, REMOVING AND INSTALLING .
- On the Audi Q5, the Sunlight Photo Sensor -G107- is installed in the mirror base.
- On the Audi Q5, the Sunlight Photo Sensor -G107- with the Humidity Sensor -G355- and the Rain/Light Recognition Sensor -G397- are combined in one component (depending on the equipment versions). Refer to the appropriate Wiring Diagram.
- The Sunlight Photo Sensor -G107- and the Humidity Sensor -G355- (on automatic A/C system) as well as the Rain/Light Recognition Sensor -G397- are installed in the mirror base, depending on the equipment versions. Refer to the appropriate Wiring Diagram.
- The Humidity Sensor -G355- and the Sunlight Photo Sensor -G107- are integrated in the Rain/Light Recognition Sensor -G397- and cannot be replaced separately if faulty. Refer to the Parts Information.
- The removal of the Rain/Light Recognition Sensor -G397- (with the Sunlight Photo Sensor -G107- and the Humidity Sensor -G355-) is described in different assembly groups depending on the vehicle.
-- Replace the Rain/Light Recognition Sensor -G397- (with Humidity Sensor -G355- and Sunlight Photo Sensor -G107-). Refer to OVERVIEW - WINDSHIELD or RAIN/LIGHT RECOGNITION SENSOR, REMOVING AND INSTALLING .