Wire Junction -TV1-, REMOVING AND INSTALLING, 0K3: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the luggage compartment floor. Refer to LUGGAGE COMPARTMENT FLOOR, REMOVING AND INSTALLING .
-- Disconnect the ground cable from the battery when the ignition is switched off. Refer to BATTERY, DISCONNECTING AND CONNECTING, 0K0 AND VH0 .
-- Release the catch -2- and open the cover -1- in direction of -arrow-.
-- Remove the nuts -2, 3, and 4- and free up the wires.
-- Remove the nuts -arrows-.
-- Remove the wire junction -1-.