Terminal 30 Wire Junction 2 -TV22-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Disconnect the ground cable from the battery when the ignition is switched off. Refer to BATTERY, DISCONNECTING AND CONNECTING, 0K0 AND VH0 .
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Release the retainers in direction of -arrows-.
-- Open the cover in the sequence -2 and 1-.
-- Remove the wires -1, 2 and 5- and free them up.
-- Remove the nut -4-.
-- Remove the wire junction -3- upward.