Overview - Relay Panel, Instrument Panel, E-Boxes Engine Compartment
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
- Bracket
- For the control modules
- Nut
- 2.5 Nm
- Quantity: 2
- Automatic Glow Time Control Module -J179-
- Removing and Installing. Refer to appropriate service information. .
- Bolt
- 2.5 Nm
- Positive Cable
- To starter, generator
- Nut
- 18 Nm
- Line
- Tightening specification: 9 Nm
- Allocation. Refer to Refer to appropriate service information.
- Line
- Tightening specification: 9 Nm
- Allocation. Refer to Refer to appropriate service information.
- Line
- Tightening specification: 9 Nm
- Allocation. Refer to Refer to appropriate service information.
- Line
- Tightening specification: 9 Nm
- Allocation. Refer to appropriate service information.
- Terminal 30 Wire Junction 2 -TV22-
- Removing and Installing. Refer to Terminal 30 Wire Junction 2 -TV22-, REMOVING AND INSTALLING .
- Nut
- 9 Nm
- Bolt
- 7.5 Nm
- Quantity: 2
- Nut
- 18 Nm
- Positive Cable
- From the battery
- Terminal 30 Wire Junction -TV2-
- Removing and Installing. Refer to Terminal 30 Wire Junction -TV2-, REMOVING AND INSTALLING .
- Suppressor -C24-
- Removing and Installing. Refer to Suppressor -C24-, REMOVING AND INSTALLING .
- Cap
- Relay and Fuse Panel 3 -SR3-
- Allocation. Refer to appropriate service information.