LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Communication) >> 91 Communication >> Telephone System >> Telephone Baseplate -R126-, REMOVING AND INSTALLING >> Removing

Telephone Baseplate -R126-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical equipment and remove the ignition key.

CAUTION:

The surfaces can get scratched very easily.

Carefully tape off all surfaces and sections!

-- Carefully unclip the mount -2- with the Telephone Baseplate -R126- -1- from the rear center console storage compartment.

GWWA91-13080Courtesy of AUDI OF AMERICA, LLC

-- Using the :T40388  -A-, carefully push the rubber lip on the Mobile Device Charger 1 -J1146- to the side and guide in the :T40388  as shown.

-- The catch -2- is released and engages in the groove on the :T40388  -A-.

-- Use the :T40388  to remove the Mobile Device Charger 1 -J1146- -1- from the storage compartment.

-- Release and disconnect the connectors from the Mobile Device Charger 1 -J1146-.