Right And Left MULTIFUNCTION Buttons On Steering Wheel -E441- / -E440-, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment and remove the ignition key.
-- Remove the driver airbag. Refer to AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING .
-- Draw sketches or take pictures of the wire routing in the steering wheel. So that when installing the original wire routing can be insured.
-- Release and remove the decorative trim -2-.
-- Release the multifunction button -1- with the : 3409 next to the catch in direction of -arrow B-.
-- Pry out the multifunction button -1- on the other side in direction of -arrow A- using the :3409 .
-- Release and disconnect the connectors on the multifunction button.