LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Communication) >> 91 Communication >> Antenna Systems >> Traffic Data Antenna, Removing And Installing >> Removing

Traffic Data Antenna, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical equipment and remove the ignition key.

The connectors -3- for the Traffic Data Antenna -R173- -1- are located behind the Front Roof Module -WX3-.

GWWA91-12288Courtesy of AUDI OF AMERICA, LLC

-- Remove the Front Roof Module -WX3-. Refer to FRONT INTERIOR LAMP/READING LAMP, REMOVING AND INSTALLING .

-- Release and disconnect the connector -3-.

A safety piece -4- secures the Traffic Data Antenna -R173- -1- to its bracket -2-. The bracket is glued to the windshield -2-.

-- Remove the safety piece -4- with a small screwdriver.

-- Pull the Traffic Data Antenna -R173- -1- out of the bracket -2- and remove.