Bumper Antennas, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment and remove the ignition key.
-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Release and disconnect the connector -5-.
-- Remove the nut -4-.
-- Remove the left bumper antenna -1- from the bracket -2-.
-- Remove the nuts -3- for the bracket -2-
-- Remove the bracket -2- from the body.