ANTENNA AMPLIFIER, REMOVING AND INSTALLING, Antenna Amplifier 3 -R112-: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment and remove the ignition key.
-- Remove the right C-pillar trim panel. Refer to C-PILLAR TRIM PANEL, REMOVING AND INSTALLING .
-- Release and disconnect the connectors -3-.
-- Only loosen the bolt -2- (do not remove).
-- Remove the Antenna Amplifier 3 -R112- -1- from the C-pillar in the direction of -arrow-.