Outer Window Shaft Strip, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the door window into the "open" position.
-- Loosen the window guide -2- from the front bonding -1-.
-- Remove the front window guide outward from the door flange -arrow-.
-- To prevent damage, tape off the :3370 and the B-pillar trim with adhesive tape -2-.
-- Guide the :3370 from behind in the window shaft strip -1- -arrow A-.
-- Remove the window shaft strip with the :3370 carefully in the rear area upward from the door flange -arrow C-.
-- Remove the window shaft strip with both hands to the A-pillar from the door flange -B arrows-.