Engine Hood Contact Switch -F266-, REMOVING AND INSTALLING
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Removing
-- Remove the front latch. Refer to LATCH, REMOVING AND INSTALLING .
-- Lift the retaining tab -1- -arrow A-.
-- Disengage the contact switch -2- from the latch -3- -arrow B- and remove.
Installing
Install in reverse order of removal and note the following:
- The guide pins -4- on the contact switch must inserted correctly in the front latch.