Overview - Front Wheel Housing Liner
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 2.5 Nm
- Quantity: 2
- Bolt
- 2.5 Nm
- Quantity: 2
- Front Outer Wheel Spoiler
- Removing and Installing. Refer to FRONT WHEEL SPOILER, REMOVING AND INSTALLING, OUTER .
- Inner Front Wheel Spoiler
- Removing and Installing. Refer to FRONT WHEEL SPOILER, REMOVING AND INSTALLING, INNER .
- Bolt
- 2.5 Nm
- Quantity: 3
- Nut
- Quantity: 3
- 2.5 Nm
- Front Wheel Housing Liner Front Section
- Removing and Installing. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING, FRONT SECTION .
- Nut
- 2.5 Nm
- Quantity: 5
- Bracket
- For the wheel housing liner to the fender
- Bolt
- 2.5 Nm
- Front Wheel Housing Liner Rear Section
- Removing and Installing. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING, REAR SECTION .
- Expanding Rivet
- Quantity: 2
- Bolt
- 2.5 Nm
- Quantity: 3