LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Exterior Equipment (Fy)) >> 66 Exterior Equipment >> Underbody Trim Panel >> Tunnel Brace, Removing And Installing >> Front Tunnel Brace, Removing And Installing >> Removing

Front Tunnel Brace, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the heat shield for the front tunnel brace. Refer to HEAT SHIELD FOR FRONT TUNNEL BRACE, REMOVING AND INSTALLING .

-- Remove the bolts -arrows-.

GWWA66-11736Courtesy of AUDI OF AMERICA, LLC

-- Vehicles with TDI engine: remove the tunnel brace.

-- Vehicles with gasoline engine: remove the exhaust system clamping sleeves. Refer to OVERVIEW - MUFFLER .

-- Remove the tunnel brace -1- forward from between the center mufflers -2-.

GWWA66-11175Courtesy of AUDI OF AMERICA, LLC