Impact Guard, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front underbody panel. Refer to UNDERBODY TRIM PANEL, REMOVING AND INSTALLING, FRONT .
-- Right side of the vehicle: free up the front tunnel heat shield near the impact guard.
-- Remove the nut -2- and bolts -3-, and push the underbody trim panel -1- slightly to the side.
-- Remove the nuts -4 and 5- and bolts -1 and 3-.
-- Remove the impact guard -2-.