Diagonal Braces, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the left and right underbody trim panel. Refer to UNDERBODY TRIM PANEL, REMOVING AND INSTALLING, SIDE .
-- Support the subframe using the :VAS6931 and :T10337 .
CAUTION:
Risk of damaging the thread by using an impact wrench.
- When installing, position the bolts by hand and screw in the first threads.
- Do not loosen or tighten the bolts with an impact wrench.
-- Remove the bolts -1 to 5- and the diagonal brace.
-- Re-install the bolts -2 and 4- all the way.