Overview - Front Heat Shield
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
- Nut
- 2.5 Nm
- Quantity: 2
- Heat Shield
- For the front longitudinal member
- Left
- Removing and Installing. Refer to FRONT LONGITUDINAL MEMBER HEAT SHIELD, REMOVING AND INSTALLING, VEHICLES WITHOUT HIGH-VOLTAGE SYSTEM .
- Nut
- 2.5 Nm
- There are different versions. Refer to the Parts Information.
- Quantity: 4
- Nut
- 2.5 Nm
- Quantity: 3
- Heat Shield
- For the front longitudinal member
- Right
- Removing and Installing. Refer to FRONT LONGITUDINAL MEMBER HEAT SHIELD, REMOVING AND INSTALLING, VEHICLES WITHOUT HIGH-VOLTAGE SYSTEM .
- Heat Shield
- For the rear longitudinal member
- Right
- Removing and Installing. Refer to REAR LONGITUDINAL MEMBER HEAT SHIELD, REMOVING AND INSTALLING .
- Lock Washer
- Quantity: 4
- Nut
- 2.5 Nm
- Quantity: 4
- Heat Shield
- For the plenum chamber bulkhead
- Removing and Installing. Refer to PLENUM CHAMBER BULKHEAD HEAT SHIELD, REMOVING AND INSTALLING .
- Heat Shield
- For the top of the front tunnel
- Removing and Installing. Refer to UPPER FRONT TUNNEL HEAT SHIELD, REMOVING AND INSTALLING .
- Nut
- 2.5 Nm
- Quantity: 4
- Heat Shield
- for the lower plenum chamber bulkhead
- Removing and Installing. Refer to LOWER PLENUM CHAMBER BULKHEAD HEAT SHIELD, REMOVING AND INSTALLING .
- Heat Shield
- For the rear longitudinal member
- Left
- Removing and Installing. Refer to REAR LONGITUDINAL MEMBER HEAT SHIELD, REMOVING AND INSTALLING .
- Nut
- 2.5 Nm
- There are different versions. Allocation. Refer to the Parts Information.
- Quantity: 4