Door C-Pillar Trim, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the door window into the "open" position.
-- Remove the window frame trim panel. Refer to WINDOW FRAME TRIM PANEL, REMOVING AND INSTALLING .
-- Remove the window guide -1- just far enough from the C-pillar trim -4- until the bolts are accessible.
-- Remove the bolts -A arrows-.
-- Push the C-pillar trim downward -arrow B-. While doing this, the tab -3- will disengage from the door body -2-.
-- Pull the C-pillar trim toward the rear from the holder and upward from the door.