Overview - Front Heat Shield
- Nut
- 2.5 Nm
- Quantity: 2
- Heat Shield
- For the front longitudinal member
- Left
- Removing and Installing. Refer to FRONT LONGITUDINAL MEMBER HEAT SHIELD, REMOVING AND INSTALLING, VEHICLES WITHOUT HIGH-VOLTAGE SYSTEM .
- Nut
- 2.5 Nm
- There are different versions. Refer to the Parts Information.
- Quantity: 4
- Nut
- 2.5 Nm
- Quantity: 3
- Heat Shield
- For the front longitudinal member
- Right
- Removing and Installing. Refer to FRONT LONGITUDINAL MEMBER HEAT SHIELD, REMOVING AND INSTALLING, VEHICLES WITHOUT HIGH-VOLTAGE SYSTEM .
- Heat Shield
- For the rear longitudinal member
- Right
- Removing and Installing. Refer to REAR LONGITUDINAL MEMBER HEAT SHIELD, REMOVING AND INSTALLING .
- Lock Washer
- Quantity: 4
- Nut
- 2.5 Nm
- Quantity: 4
- Heat Shield
- For the plenum chamber bulkhead
- Removing and Installing. Refer to PLENUM CHAMBER BULKHEAD HEAT SHIELD, REMOVING AND INSTALLING .
- Heat Shield
- For the top of the front tunnel
- Removing and Installing. Refer to UPPER FRONT TUNNEL HEAT SHIELD, REMOVING AND INSTALLING .
- Nut
- 2.5 Nm
- Quantity: 4
- Heat Shield
- for the lower plenum chamber bulkhead
- Removing and Installing. Refer to LOWER PLENUM CHAMBER BULKHEAD HEAT SHIELD, REMOVING AND INSTALLING .
- Heat Shield
- For the rear longitudinal member
- Left
- Removing and Installing. Refer to REAR LONGITUDINAL MEMBER HEAT SHIELD, REMOVING AND INSTALLING .
- Nut
- 2.5 Nm
- There are different versions. Allocation. Refer to the Parts Information.
- Quantity: 4