Overview - Bumper Cover Mount

Fig 1: Exploded View Of Bumper Cover Mount

Courtesy of AUDI OF AMERICA, LLC

1. Mount
   • Side
   • For the bumper cover
   • Removing and Installing. Refer to BUMPER COVER MOUNT, REMOVING AND INSTALLING, SIDE .
2. Bolt
   • Quantity: 4
   • Tightening sequence. Refer to Fig 2.
3. Nut
   • 2.5 Nm
   • Quantity: 2
4. Mount
   • Center
   • For the bumper cover
   • Removing and Installing. Refer to CENTER BUMPER COVER MOUNT, REMOVING AND INSTALLING .
5. Nut
   • 2.5 Nm
   • Quantity: 6
6. Lower Mount
   • For the bumper cover
   • Removing and Installing. Refer to BUMPER COVER MOUNT, REMOVING AND INSTALLING, BOTTOM .
7. Nut
   • 2.5 Nm
   • Quantity: 4

Bumper Cover Side Mount - Tightening Specification and Sequence 

Fig 2: Bumper Cover Side Mount - Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts in the sequence shown -1 to 4- to 3 Nm.