Overview - Impact Member, Equipment Variations

Fig 1: Exploded View Of Impact Member, Equipment Variations

Courtesy of AUDI OF AMERICA, LLC

1. Air Duct Front Section
   • Right
   • Clipped into the rear section air guide
2. Impact Member
   • There are different versions. Refer to the Parts Information.
   • Removing and Installing. Refer to IMPACT MEMBER, REMOVING AND INSTALLING, EQUIPMENT VARIATIONS .
3. Air Duct Rear Section
   • Right
4. Air Duct Rear Section
   • Left
5. Bolt
   • 4.5 Nm
   • For securing the impact member to the lock carrier
6. Bolt
   • 60 Nm
   • Quantity: 4
7. Air Duct Front Section
   • Left
   • Clipped into the rear section air guide
8. Bracket
   • For Outside Air Temperature Sensor -G17-
   • Versions. Refer to the Parts Information.
   • Removing and Installing. Refer to Outside Air Temperature Sensor -G17- BRACKET, REMOVING AND INSTALLING .
9. Outside Air Temperature Sensor -G17-
   • Removing and Installing. Refer to OUTSIDE AIR TEMPERATURE SENSOR -G17-, REMOVING AND INSTALLING .