Overview - Bumper Cover, S Line
- End Panel
- The bumper cover
- Removing and Installing. Refer to BUMPER COVER END PLATE, REMOVING AND INSTALLING .
- Towing Eye Cover
- Air Duct
- Center
- Removing and Installing. Refer to CENTER AIR DUCT, REMOVING AND INSTALLING, S LINE .
- Bolt
- 2 Nm
- Quantity: 4
- Cap
- For the air intake grille
- Equipped on some models
- Removing and Installing. Refer to AIR INTAKE GRILLE CAP, REMOVING AND INSTALLING .
- Mount
- For the bumper cover
- To secure the headlamp
- Removing and Installing. Refer to BUMPER COVER MOUNT, REMOVING AND INSTALLING .
- Side Cap
- For the air intake grille
- Equipped on some models
- Removing and Installing. Refer to AIR INTAKE GRILLE CAP, REMOVING AND INSTALLING .
- Nut
- 4 Nm
- Quantity: 5
- Cover
- for the lower air intake grille
- Removing and Installing. Refer to SIDE AIR DUCT, REMOVING AND INSTALLING, S LINE .
- Side Air Intake Grille
- Removing and Installing. Refer to SIDE AIR DUCT, REMOVING AND INSTALLING, S LINE .
- Bolt
- 2.5 Nm
- Bumper Cover
- Removing and Installing. Refer to BUMPER COVER, REMOVING AND INSTALLING .
- Overview - Rear Reflector. Refer to OVERVIEW - REAR REFLECTOR
- Overview - Covers and Air Guides. Refer to OVERVIEW - COVERS AND AIR GUIDES
- Washer Nozzle Cover
- For the headlamp washer system
- Removing and Installing. Refer to HEADLAMP WASHER SYSTEM WASHER NOZZLE COVER, REMOVING AND INSTALLING .
- Bolt
- 2 Nm
- Quantity: 8