Evacuating And Charging Valve, Removing And Installing, Low And High Pressure Side: Installing
Install in reverse order of removal and Note The Following:
-- Check the securing of the refrigerant lines to the service connections in the bracket -E-.
-- Evacuate and fill the refrigerant circuit. Refer to REFRIGERANT CIRCUIT, EVACUATING WITH A/C SERVICE STATION [R134a] /REFRIGERANT CIRCUIT, CHARGING WITH A/C SERVICE STATION [R134a] or REFRIGERANT CIRCUIT, EVACUATING [R1234yf] / REFRIGERANT CIRCUIT, CHARGING [R1234yf] .
-- Operate the A/C system after charging the refrigerant circuit. Refer to A/C SYSTEM, STARTING AFTER CHARGING REFRIGERANT CIRCUIT .
Read the information for starting the A/C system after filling. Refer to A/C SYSTEM, STARTING AFTER CHARGING REFRIGERANT CIRCUIT / A/C SYSTEM, GENERAL INFORMATION or A/C SYSTEM, OPERATING AFTER CHARGING [R1234yf] .
-- Retrieve the Front A/C Display Control Head -E87- DTC memory and delete the displayed error if necessary. Use the Vehicle Diagnostic Tester.