Overview - Fuel Tank, TFSI AWD Vehicles Rest Of World Market Version
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Audi S4, 2019 Audi S4, 2019 Audi A4 allroad, 2019 Audi A4, and 2018 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Secured with expanding clip on the expanding clip 20 Nm
- Mounting Strap
- Fuel Line
- To the engine
- Do not kink
- Clipped to the fuel tank
- Connector couplings, separating and connecting. Refer to CONNECTOR COUPLINGS, DISCONNECTING .
- Bolt
- 20 Nm
- Bolt
- Secures the fuel filler neck and works at the same time as the ground connection
- A4: Quantity 2
- A5: Quantity 3
- 8 Nm
- Secures the fuel filler neck and works at the same time as the ground connection
- Cap
- Attached to the fuel filler door unit with fastening device
- Turn until it clicks into place.
- Breather Line
- To the EVAP Canister
- Do not kink
- Connector couplings, separating and connecting. Refer to CONNECTOR COUPLINGS, DISCONNECTING .
- Bushing
- Rubber Bushing
- Bolt
- 20 Nm
- Mounting Strap
- Secured to the fuel tank with expanding clips.
- Heat Shield
- For The Fuel Tank
- Fuel Tank
- There are different versions. Refer to the Parts Information for the allocation.
- Removing and Installing. Refer to FUEL TANK, REMOVING, TFSI VEHICLES .
- Bolt
- 20 Nm
- Mounting Strap
- Secured to the fuel tank with expanding clips.
- Bolt
- 20 Nm
- Spring Nut
- 2 Nm
- For the heat shield
- Quantity: 5
- Bolt
- 20 Nm