LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> A4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Fuel Supply [CYMC, DBPA]) >> 20 Fuel Supply >> Fuel Tank >> Fuel Tank, Removing And Installing >> Fuel Tank, Removing, TFSI Vehicles >> AWD Vehicles

AWD Vehicles

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Audi S4, 2019 Audi S4, 2019 Audi A4 allroad, 2019 Audi A4, and 2018 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

-- Equipped on some models: remove the diagonal brace. Refer to DIAGONAL BRACES, REMOVING AND INSTALLING (A4) .

-- Remove The Driveshaft. Refer To the appropriate service information.

FWD/AWD Vehicles North American Market-Specific Version and Rest of World AWD Vehicles:

GWWA20-11712Courtesy of AUDI OF AMERICA, LLC

-- Place the :T40173  on the :VAS6931  and support as shown on the fuel tank.

WARNING:

Risk of accident due to the weight of the fuel tank.

  • The fuel tank must be empty when removing it.

-- Remove the bolts -1 through 7-.

GWWA20-11713Courtesy of AUDI OF AMERICA, LLC
NOTE:

For clarity, the fuel tank is shown without the engine and gearbox jack.

-- Lower the fuel tank with the :VAS6931  .

GWWA20-11712Courtesy of AUDI OF AMERICA, LLC
NOTE:

When guiding out the fuel tank check the clearance to the fuel filler neck.