Fuel Gauge Sensor -G-, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Audi S4, 2019 Audi S4, 2019 Audi A4 allroad, 2019 Audi A4, and 2018 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
-- Follow all safety precautions. Refer to SAFETY PRECAUTIONS .
-- Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
-- Remove the fuel delivery unit. Refer to FUEL DELIVERY UNIT/FUEL LEVEL SENSOR, REMOVING AND INSTALLING .
-- Reach through the fuel tank opening, release the catch -2- in direction of -arrow A- and at the same time remove the bracket Fuel Level Sensor -G- -1- from the mount on the baffle housing in direction of -arrow B-.
NOTE:
Be careful not to bend the floater arm on the fuel level sensor when removing.
Take care when removing the Fuel Gauge Sensor -G- to make note of the position it was removed.
-- Carefully remove the Fuel Gauge Sensor -G- from the fuel tank opening.