Fuel Gauge Sensor -G-, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Audi S4, 2019 Audi S4, 2019 Audi A4 allroad, 2019 Audi A4, and 2018 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and Note The Following:
NOTE:
Be careful not to bend the floater arm on the fuel level sensor when inserting.
Be careful to install the Fuel Gauge Sensor -G- into the same position it was removed from.
-- Guide the Fuel Gauge Sensor -G- carefully through the opening in the fuel tank.
-- Insert the Fuel Gauge Sensor -G- into the mount on the baffle housing and push downward until it engages.
-- Install the fuel delivery unit. Refer to FUEL DELIVERY UNIT/FUEL LEVEL SENSOR, REMOVING AND INSTALLING .