Overview - EVAP System, Market-Specific Rest Of World

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Audi S4, 2019 Audi S4, 2019 Audi A4 allroad, 2019 Audi A4, and 2018 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The Overview Only Applies To TFSI Vehicles.

Fig 1: EVAP System, Market-Specific Rest Of World

Courtesy of AUDI OF AMERICA, LLC

Bolt
- Quantity: 3
- 8 Nm
Nut
- Quantity: 2
- 20 Nm
EVAP Canister
- Component location: right rear
- Removing and Installing. Refer to EVAP CANISTER, REMOVING AND INSTALLING, MARKET-SPECIFIC REST OF WORLD .
Bleeder Line
- From the fuel tank
- Connector Couplings, Disconnecting and Connecting. Refer to CONNECTOR COUPLINGS, DISCONNECTING .
Vent Line
- Vents out to the right rear under the wheel housing liner
- Connector Couplings, Disconnecting and Connecting. Refer to CONNECTOR COUPLINGS, DISCONNECTING .
Bleeder Line
- To the EVAP Canister Purge Regulator Valve 1 -N80-
- Connector Couplings, Disconnecting and Connecting. Refer to CONNECTOR COUPLINGS, DISCONNECTING .
- Clipped to the underbody
Bracket
Bolt
- 20 Nm