Fuel Tank Leak Detection Control Module -J909-, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Audi S4, 2019 Audi S4, 2019 Audi A4 allroad, 2019 Audi A4, and 2018 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the right rear underbody trim panel. Refer to REAR UNDERBODY TRIM PANEL, REMOVING AND INSTALLING .
-- Release the connector safety catch and disconnect the connector -2-.
-- Remove the nuts -arrows- and disengage the fuel tank leak detection control module -1- from the fuel tank.