Version 8

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Audi S4, 2019 Audi S4, 2019 Audi A4 allroad, 2019 Audi A4, and 2018 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

Straight connector coupling with right and left connector coupling -1- and cable tie -2-.

Opening

-- Cut through the cable tie for the clip and connector coupling -3-.

-- Release the clip -1- from the connector coupling in the direction of -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Press the release buttons in direction of -A arrows- and hold pressed.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the connector coupling in the direction of -arrow B-.

Note the color coding when installing. Refer to CONNECTOR COUPLING ALLOCATION .
The connector couplings must >>audibly<< engage when locking.

-- Pull on the connector coupling to check for secure fit.

-- Push the clip -1- on the connector coupling -2- in direction of -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- The clip -1- is seated on the connector coupling as shown.

Courtesy of AUDI OF AMERICA, LLC

The release buttons -arrow- of the connector coupling -2- must be accessible through the connector coupling window.

-- Place the fuel line -1- on the connector coupling -2- in direction of -arrow A-.

Courtesy of AUDI OF AMERICA, LLC

-- Pull on the connector coupling to check for secure fit in direction of -B arrows-.

-- Push down the clip -1- in direction of -arrow- the connector coupling is secured by this.

Courtesy of AUDI OF AMERICA, LLC

-- Secure the clip -1- with cable tie -2- on the connector coupling -3-.

Courtesy of AUDI OF AMERICA, LLC