Accelerator Pedal Position Sensors -G79- / -G185-, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Audi S4, 2019 Audi S4, 2019 Audi A4 allroad, 2019 Audi A4, and 2018 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove The Driver Side Instrument Panel Cover. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .

-- Press the release and disconnect the connector -2-.

Fig 1: Accelerator Pedal Position Sensor -G79- /Accelerator Pedal Position Sensor 2 -G185-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1-.

-- Disengage the lower accelerator pedal module -3- from the pedal bracket and remove.