LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> A3 Premium Plus >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Turbocharger, Supercharger [CZPB,CZRA,DBFB,DKZA,DKVA] >> 21 Turbocharger, Supercharger >> Charge Air System >> Charge Air Cooler, Removing And Installing >> Removing

Charge Air Cooler, Removing And Installing: Removing

-- Pay attention to the guidelines for clean working conditions. Refer to CLEAN WORKING CONDITIONS .

-- Remove the radiator. Refer to RADIATOR, REMOVING AND INSTALLING .

-- Loosen the clamps -1 and 2- and remove the air guide hose.

Fig 1: Identifying Clamps
GWWA21-10489Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Seal the open lines and connections with clean plugs from the :VAS6122  .

-- Unlock the catch in direction of -arrow- and remove the cover -1- toward the front.

GWWA19-11552Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unclip the left and right air duct -2- downward in direction of -arrow B-.

GWWA19-11554Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Open the left and right retainers in direction of -arrow A-, and disengage the condenser -3- from the charge air cooler -1-.

-- Secure the condenser to the lock carrier.

-- Remove the charge air cooler.

-- Remove the charge air cooler downward.