Transmission To 6-Cylinder TDI Engine:

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2020 Audi A4, 2019 Audi A5 Quattro, and 2019 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Transmission Mounting Bolts and Alignment Sleeves (6-Cylinder TDI Engine)

Courtesy of AUDI OF AMERICA, LLC

Items	Bolts	Tightening Specifications
1 ¹⁾	M10 x 50 ²⁾	65 Nm
2 ¹⁾	M12 x 100 ⁴⁾	30 Nm + 90°
3, 4, 5, 6	M12 x 100 ⁴⁾	30 Nm + 90°
7	M12 x 125 ⁴⁾	30 Nm + 90°
8, 9 and 10	M10 x 60 ⁴⁾	15 Nm + 90°
A	Alignment sleeves for centering
¹⁾ Mount the auxiliary adapter ²⁾ Bolt strength rating 10.9. There is no limit to the number of times steel bolts may be used. ⁴⁾ The bolts may be used twice. Refer to TRANSMISSION TIGHTENING SPECIFICATIONS .

The aluminum bolts may be used two times. Therefore, the bolts must be marked with two notches "X" made by a chisel after they have be used the first time -arrow-.

Fig 2: Identifying Aluminum Bolts Marked With An "X"

Courtesy of AUDI OF AMERICA, LLC

To prevent damaging the bolts when marking them, do not clamp them in a vise. Insert the bolt in a 14 mm socket with a ¹ /₂ drive, which is inserted in to the vise, as shown.

Bolts marked with an "X" may not be used again.