LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2019 >> S4 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Controls, Housing (7-Speed Dual Clutch Transmission 0CJ, 0CK, 0CL, 0DN, 0DP)) >> 34 Controls, Housing >> Selector Mechanism >> Selector Lever Handle, Removing And Installing >> Removing

Selector Lever Handle, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2020 Audi A4, 2019 Audi A5 Quattro, and 2019 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the selector lever handle upper section -1- upward in direction of -arrows-.

GWWA34-11522Courtesy of AUDI OF AMERICA, LLC

-- Carefully pry out the selector lever boot on the side using the :3409  in direction of -arrow-.

GWWA34-11523Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -2-.

-- Pull the selector lever handle lower section -1- upward.

scientia non olet · About LEMON Manuals