Gearshift Mechanism On Transmission
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2020 Audi A4, 2019 Audi A5 Quattro, and 2019 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
- Drive Position Sensor -G676-
- Removing and installing. Refer to PARKING LOCK SOLENOID -N486- /DRIVE POSITION SENSOR -G676-, REMOVING AND INSTALLING .
- Shaft
- For the parking lock
- Bolt
- 3 Nm + 90°
- Always replace after removing
- M6 X 30
- Parking Lock Solenoid -N486-
- Electro-hydraulic part
- Removing and installing. Refer to PARKING LOCK SOLENOID -N486- /DRIVE POSITION SENSOR -G676-, REMOVING AND INSTALLING .
- Seal
- Always replace after removing
- Seal
- Replacing. Refer to PARKING LOCK SHAFT SEAL, REPLACING .
- For the parking lock shaft
- Spring Pin
- Lever
- For the parking lock
- Removing and installing. Refer to PARKING LOCK SHAFT SEAL, REPLACING .
- Cover
- For the parking lock
- With electric wiring harness
- Bolt
- 3 Nm + 45°
- Always replace after removing
- M6 X 14
- Bolt
- 8 Nm + 60°
- Always replace after removing
- M8 X 22
- Alignment Pin
- Quantity: 2
- Bolt
- 3 Nm + 180°
- Always replace after removing
- M6 X 55
- Bolt
- 3 Nm + 90°
- Always replace after removing
- M6 X 35