4. Checking The Display In The Instrument Cluster

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2020 Audi A4, 2019 Audi A5 Quattro, and 2019 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

Test step 4.1

Engine running, selector lever position "P" engaged, foot brake not pressed.

-- Press the release button -2- and move the selector lever in the direction of "D" or "R".

The following message must be displayed in the instrument cluster: "To select a position please press the foot brake and the locking button on the selector lever".

Test step 4.2

Engine running, selector lever position "P" engaged, foot brake pressed.

-- Do not press the release button -2- and move the selector lever in the direction of "D" or "R".

The following message must be displayed in the instrument cluster: "To select a position please press the foot brake and the locking button on the selector lever".

Test step 4.3

Engine running, selector lever position "M" engaged.

-- Press the release button and at the same time the selector lever must be in "M" longer than 20 seconds (Not on tiptronic plus or tiptronic minus):

In the instrument cluster the following message must be displayed: "Bring the selector lever into the automatic position". Additionally there is a warning tone.