3. Checking The Transmission Range Indicator
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2020 Audi A4, 2019 Audi A5 Quattro, and 2019 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Test step 3.1
- Engine is running.
-- Engage the positions "P", "R", "N", "D/S" and "+/-" one after the other.
The respective selector lever position must be significantly brighter than the other drive gear symbols.
Test step 3.2
- Engine is running.
-- Engage the "P" position to do so press the button -3-.
The P symbol in the button in the selector lever handle must light up in white as a function lamp.
The P symbol in the Selector Lever Transmission Range Display -Y5- -1- as a function lamp must be red.
In all other selector lever positions it must not be illuminated.