2. Function Test Of The Selector Mechanism (SHIFTLOCK)

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2020 Audi A4, 2019 Audi A5 Quattro, and 2019 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

Test step 2.1

Engine running, selector lever position "D" engaged and vehicle speed greater than 3 km/h (1.8 mph).

-- Engage the "N" position. Then without pressing the release button -2- and brake, select the selector lever position "D".

It must be possible.

Test step 2.2

Engine running, selector lever position "D" engaged and vehicle speed less than 3km/h (1.8 mph).

-- Engage the selector lever position "N" for at least one second, do not press the foot brake and press the release button -2-.

Positions "R" and "D" must not be engaged.

Test step 2.3

Engine running, selector lever position "N" engaged and vehicle speed less than 3km/h (1.8 mph).

-- Press the foot brake and do not press the release button -2-.

Position "R" must not be engaged.

Position "D" must be able to be engaged.

Test step 2.4

Engine running, selector lever position "M" engaged.

-- Engage the selector lever position "P" to do so press the P button in the selector lever handle.

The selector lever position "P" must be engaged and displayed on the P button of the selector lever handle and in the instrument cluster. Additionally the P symbol between the positions "N" and "D/S" on the Selector Lever Transmission Range Display -Y5- -1- must turn on.

The selector lever must move itself back into the automatic shift gate.

Test step 2.5

Engine running, selector lever position "M" engaged.

-- Move the selector lever to "+" and "-".

While driving the transmission range indicator in the instrument cluster must change each time a higher or lower gear is selected if the speed permits it.