LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2019 >> S4 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Controls, Housing (7-Speed Dual Clutch Transmission 0CJ, 0CK, 0CL, 0DN, 0DP)) >> 34 Controls, Housing >> ATF Circuit >> Overview - ATF Circuit >> ATF Cooler - Tightening Specification And Sequence

ATF Cooler - Tightening Specification And Sequence

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2020 Audi A4, 2019 Audi A5 Quattro, and 2019 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: ATF Cooler - Tightening Sequence
GWWA34-11300Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts in steps according to the specified sequence:

Step Bolts Tightening Specification/Additional Turn
1. -1- Install all the way by hand
2. -1- 3 Nm + 90°
3. -2 and 3- Install all the way by hand
4. -2 and 3- 3 Nm + 30°
scientia non olet · About LEMON Manuals