Transmission Housing Bolts Tightening Sequence
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2020 Audi A4, 2019 Audi A5 Quattro, and 2019 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
-- Tighten the bolts in three steps in the sequence shown:
| Step | Bolts | Tightening Specification |
|---|---|---|
| 1. | -1 to 9- | Install by hand evenly until the bolt head contact the transmission housing. |
| 2. | -1 to 9- | Tighten one after the other to 10 Nm + 90° |
| 3. | -Arrow- | Tighten the remaining bolts clockwise to 10 Nm + 90° |