LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2019 >> S4 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Controls, Housing [Servicing - 7-Speed Dual Clutch Transmission 0CJ, 0CL, 0CK, 0DN, 0DP]) >> 34 Controls, Housing >> Transmission, Disassembling And Assembling >> Overview - Gear Set >> Overview - Gear Set, Fwd Vehicles >> Gear Positioner And Pressure Reservoir Bolts Tightening Sequence

Gear Positioner And Pressure Reservoir Bolts Tightening Sequence

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2020 Audi A4, 2019 Audi A5 Quattro, and 2019 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Gear Positioner And Pressure Reservoir Bolts Tightening Sequence
GWWA34-11582Courtesy of AUDI OF AMERICA, LLC
NOTE:

Replace the bolts.

-- Tighten the bolts in two steps in the sequence shown:

Step M6 X 30 Bolts Tightening Specification
1. -1 to 8- 3 Nm
2. -1 to 8- 90°
scientia non olet · About LEMON Manuals